I recently learned of an office that was audited based on the number of acupuncture sessions performed in one day. Is there a maximum number of sessions that can be performed in one day?
The acupuncture codes 97810-97814 all indicate 15 minutes face-to-face with the patient with insertion. In simple terms this means that the needle(s) must be inserted, but also requires 15 minutes face-to-face time with the patient. The 15 minutes is just as important as inserting the needles when it comes to the coding.
The 15 minute increment of time is defined as personal one-on-one contact with the patient. This means that the acupuncturist is in the room with the patient, is actively performing a medically necessary activity that is a component of acupuncture or electro acupuncture. The time that the needles are retained is specifically excluded for the purpose of determining time and consequently from reimbursement. Just like with massage, 97124, the time that can be billed is the time that the massage is occurring and anytime the patient is left to relax would not count towards any billable service.
Regence Blue Cross,et al., have recently published specific time requirements for acupuncture and it aligns with the timed interventions related to 15 minute physical medicine services.
Eight Minute Rule for Timed Codes – One Service
For services billed in 15-minute units, count the minutes of skilled treatment provided. Only direct, face-to-face time with the patient is considered for timed codes.
- Seven minutes or less of a single service is not billable.
- Eight minutes or more of a single service is billable as one unit or an additional unit if the prior units were each furnished for a full one.
| Minutes T0 Determine Billable Units | |
| 8-12 Minutes | 1 Unit |
| 23-37 Minutes | 2 Units |
| 38-52 Minutes | 3 Units |
| 53-67 Minutes | 4 Units |
Based on the time value it is only possible to perform a maximum of four sessions of acupuncture per hour based on the face-to-face time requirement. Further, if only 20 minutes is spent face-to-face regardless of insertions there can be no more than one code billed, as the minimum face-to-face time is 23 minutes for two units or sessions.
The expectation (based on the work values for these codes) is that a provider’s direct patient contact time for each unit will average 15 minutes in length. Pre, intra, and post-delivery face-to-face time with the patient is counted and determines the total treatment service time. If more than one 15 minute timed CPT code is billed during a single calendar day, then the total number of timed units that can be billed is constrained by the total treatment minutes for that day.
Documentation to support timed skilled intervention is required. Demonstration of skilled care requires documentation of the type and level of skilled assistance given to the patient, clinical decision making or problem solving, and continued analysis of patient progress. This may be documented by recording both the type and amount of manual, visual, and/or verbal cues used by the acupuncturist to monitor the patient during the acupuncture treatment. Another way of documenting skilled care may be to provide documented observation regarding responses before, during, and after an intervention as well as the patient’s specific response to the intervention. It is not unusual for an acupuncturist to monitor a patient’s progress with pulse or other evaluation methods while needles are inserted. Additionally any time spent manually stimulating needles while inserted would count towards the skilled intervention time.
So indeed, there can be a maximum of acupuncture services provided and billed in one day, but that is based on the total number of hours the acupuncturist is seeing patients.
Click here for more information about Samuel A. Collins.